Automatic Control Brass Wire Fine Stretching Machine From Wiremac
Product Description
Introduction:
A brass wire drawing machine is a type of industrial equipment used to draw or pull a brass wire through a series of dies in order to reduce its diameter. The machine is designed to produce a uniform and smooth surface finish on the wire and to increase its tensile strength.
The process of wire drawing involves feeding a coil of brass wire into the drawing machine, which then pulls the wire through a series of progressively smaller dies that are designed to reduce the diameter of the wire. As the wire is pulled through each die, it is also elongated, resulting in an increase in its length.
The brass wire drawing machine is typically comprised of several components, including a wire drawing drum, a wire drawing die, a wire drawing lubrication system, and a wire drawing speed control system. The wire drawing drum is the main component of the machine and is responsible for pulling the wire through the dies. The wire drawing die is the component that actually reduces the diameter of the wire. The lubrication system is used to apply lubricant to the wire as it is pulled through the dies to reduce friction and prevent damage to the wire. The speed control system is used to adjust the speed at which the wire is drawn through the dies.
Brass wire drawing machines are used in a wide range of industries, including electrical, automotive, and construction. The drawn wire can be used for a variety of applications, including wiring, springs, fasteners, and jewelry.
Fine Wire Drawing Machine:
Characteristics
1. Automatic tension control by dual-inverter.
2. Zero-slip design, high productivity.
3. Low power consumption, a reduction of 20%-25% compared with the traditional type of machine, reduced production costs.
4. Widely used imported advanced parts and components ensure high reliability.
Product Parameters
Technical Parameters
| Name |
24DHA |
24DHB |
| Power control |
Integrated control |
| Inlet diameter |
Φ 0.6 - 1.2 mm |
Φ 0.6 - 1.2 mm |
| Outlet diameter |
Φ 0.08 - 0.32 mm |
Φ 0.08 - 0.32 mm |
| Drawing line speed |
2500 m/min |
2500 m/min |
| Drawing dies No.(Max) |
24 |
24 |
| Mechanical Elongation Rate |
15% + 8.7% |
13% + 8.7% |
| Construction of the machine body |
Monoblock casting |
| Capstan |
Imported high quality ceramic |
| Capstan dia.(Max) |
Φ 206.85 mm |
| Dimension of take- up spool |
Φ 300 x 215 x 270 / Φ 300 x 215 x 290 mm |
| Traverse method |
Flat belt |
| Drawing / take-up motor |
AC 11KW / AC 3.7KW |
| Drive |
Imported advanced flat belt drive |
| Control type |
Integrated automatic control |
| Maximum copper load |
50 kg |
| Power supply |
380V, 50/60Hz |
| Lubricantion type |
Spray type |
| Brake |
Magnetic brake |
| Machine dimension |
L2670 x W1500 x H1950 mm |
| Machine weight |
2200 kgs |
Detailed Photos
Company Profile
WIREMAC MACHINERY EQPT. CO., LTD. is located in Humen,Dongguan, a Famous historic town in China.It is wire and cable equipment manufacturer integreating R&D, processing, assembly, commissioning and after-sales.
The company is committed to copper wire, copper clad steel, copper clad aluminum and other metal wire deep processing industry research, production of a variety of high-speed micro-drawing machine.Small drawing machine, small drawing continuous annealing machine, medium and small drawing machine, medium and small continuous annealing machine, medium drawing continuous annealing machine, large drawing machine, large drawing continuous annealing machine, wire drawing machine, annealing tin plating machine and other products.
The company upholds the spirit of "honesty-base, quality-based" enterprise, we will continue to research and develop innovation and development, with professional skills and standardized pragmatic management, in line with the "high-quality and efficient" business philosophy, from the overall planning, staff training, installation and commissioning, after-sales service, to provide customers with better and more satisfactory Marketing and service.
Our Service
CONSULTING SERVICE
A team of experienced engineers are ready to advise you personally.
Your benefits at a glance:Problems can be solved quickly over the phone and internet in direct contact with the correct employee for the issue at hand.
SPARE PARTS SERVICE
The strengths of our skilled employees include expert advice, offering spare parts specific to your requirements and short delivery times.
Your benefits at a glance:Increased processing times for your machines thanks to the prompt delivery of spare parts.You receive original parts that are specially optimized for your machines.
MAINTENANCE SERVICE
HMP carries out regular maintenance as part of its service agreements.
Your benefits at a glance:Expert maintenance of your machines is key to increasing machine availability and product quality.
INSPECTION SERVICE
We carry out preventive maintenance on your machines.
Your benefits at a glance:Potential faults are recognized at an early stage, giving us time to carry out preventive maintenance work.This helps avoid unscheduled downtime and costs.
TRAINING SERVICE
We can organize individual training courses for you at your factory or at our premises.
Your benefits at a glance:Well-trained staff ensure increased machine utilization and improved product quality.Employees get to meet their contact partners at HMP personally.
AFTER SALES SERVICE
1) 24 hours service on Internet and Telephone, free instructions and problem solving.
2) Free training to make sure a master of the operating of line for the person who come to our factory.
3) User-friendly English manual or operating video for machine using and maintaining.
4) On-the-spot training, installation and repairing can be meet if required.
(If so, the buyer should afford the visa and air ticket and allowance 100USD/DAY Salary)
Our Advantages
1. All the electrical elements, Circuit breaker protection and AC contactors are world famous brand.
2. International CE standard high flexibility, high shielding cables.
3. Warranty time:1 year
4. Quotation validity: 90 days
5. Payment terms: 30% deposit, 70% balance made before shipment
6. Delivery time: 30 days upon receipt of 30% deposit by T/T
Location:
1. Only 35 minutes from Guangzhou city to Dongguan city by high speed train.
2. Just 40 minutes from Shenzhen city to Dongguan city by high speed train.
3. Total 1.5 hours by car from Guangzhou airport to our factory.
4. Only 1 hour by car from Shenzhen airport to our factory.
FAQ
1. Q: Are you manufacturer or trading company?
A: We are manufacture and trading company.
2. Q: What info you need before you make the proposal?
A: The pipe diameter and thickness range which you need or the profile drawings, material information, your special requirements.
3. Q: What is the MOQ?
A: One set
4. Q: Do you provide installing and debugging overseas?
A: Overseas machine install and worker training services are optional.
5. Q: Can you make the machine according to my design or prototype?
A: Yes, we have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us.
6. Q: How does your factory do regarding quality control?
A: There is no tolerance regarding quality control. Quality control complies with ISO 9001.Every machine has to past testing running before it's packed for shipment.
7. Q: How can I trust you that machines pasted testing running before shipping?
A: 1) We record the testing video for your reference
2) We welcome you visit us and test machine by yourself in our factory.
8. Q: What about our after-sale service?
A: We provide technical support on line as well as overseas services by skillful technicians.
9. Q: What should I do if I just start a new business?
A: Contact us immediately, we provide free consultant pre-sales service. Also we can help you to solve the material(steel coil)purchase, worker train, international market price.
10. Q: Can I visit you factory to check machines on-site? What Should I bring when I visit your factory?
A: We are manufacturer, and we welcome customers to visit our factory. For special product design and develop, we request you bring a piece of testing material, you can test on our machines on-site.
Audited Supplier 
){kind=link}
){kind=link}